Adobe® Photoshop® CS6 for Windows or Mac provides exclusive features not found in other software.
You don’t need to know any programming to use Photoshop. You can easily drag, drop, and paste images into a working file to make basic changes. If you do need to apply filters or other effects, look into Photoshop Actions (covered in Chapter 12), which allow for one-step action sequences that can make image manipulations quick and painless.
One of the best features of the Elements workspace is that it gives you the opportunity to edit a single image or a group of images in one place. You can view, edit, and work on multiple images, then save and export directly to a supported format for use in other programs or for publication. As a result, the program is ideally suited to editing large batches of images as well as single ones.
The following sections cover the exams you’re likely to encounter on the exam. In most cases, you can use the exam-specific icons provided in the upcoming charts to help you identify images that represent a particular type of content.
As you can imagine, the format for a software review differs radically from a book review. There is no table of contents or list of chapters, as there is in a book. Rather, the exam is presented in a single compressed design (the review contains a few pages of screenshots) in a folder. The folder is like a single file, so all elements are in a single compressed folder, and the CS6 Design Exam has more than 50 images and 150 questions.
To make matters a little more complicated, the Exam Preparation Guide is a single document so it includes all of the hints and answers for the entire exam.
The Designing topic provides a composite of questions that focus on producing one or more images that meet the publisher’s requirements. The first set of questions is based on a series of still images, with the second set of questions based on animated images. You’re tested on each topic — from practical design tasks such as editing, arranging, and experimenting to more complex tasks such as composing a layout.
To access each of the Designing questions, click the relevant question code in the exam. You are presented with a composite of questions that build upon one another. You have the option of going to the next question or selecting a completed answer to return to the previous one.
NOTE: You have a choice of scanning images that are
In this article, we will show you how to use Photoshop Elements to make your own illustrations in a similar fashion to Photoshop, including real-time editing tools, painting, special effects and layer styles.
We will also briefly cover the topics of saving, exporting, image quality and other use cases.
If you don’t know Photoshop Elements, you can check out our article here that covers the essentials of the basic application.
Get the best FREE online toolkit Get the best FREE online toolkit to help you master Photoshop CC and make your next project great. The Ultimate Beginner’s Guide to Photoshop CC
Make sure you have both Elements 11 and Photoshop CC installed. These are separate applications but they are linked so that you can use their respective features from within each other. If you don’t have Elements installed, you can download it here.
Create an image
In this tutorial, we will focus primarily on creating a basic illustration within the application. However, you can use this same tutorial to learn how to adjust the settings of an image, and apply layer styles.
To create an image, simply click the plus (+) icon that’s located on the toolbar and drag to create a new canvas or open an existing image.
A new window will appear, containing a canvas that’s ready to use. You will learn how to use this in the following sections.
Laying out an image
At the top of the screen, we will choose how the image is laid out. This setting is called clipping and it’s the ratio between the size of the image and the canvas. This is a very important step as it is crucial to your workflow. If you’re going to use just the canvas as a drawing surface, you’ll want to use a view that has a square aspect ratio. As the canvas grows in size, the image becomes stretched vertically or horizontally. At a certain point, the canvas becomes too large for the image to fit without stretching it too far. This is where you’ll need to turn clipping on.
In this example, our image will be 1680px wide, but we’re laying it out to be 3280px wide. You can use the demo below to check if the image will still be fitting on the new canvas.
Click the image area to open the clipping settings in the Layers panel.
Women having babies in place of the father.
The phenomenon of girls having children to replace the biological father, or of young women having children to match-up with their husbands, was observed in the New York Metropolitan area in the period 1978-1981. Among the’missing fathers’, 54.3 per cent were immigrants of Latin American origin and 20.7 per cent African American. Among the’maternal families’, 77.2 per cent of the fathers were less than 45 years old and 5.2 per cent were dead. Among the’stolen fathers’ and ‘unnatural fathers’ the ratios were respectively 3.9:1 and 1.4:1.Q:
Does the word “there” require the pronoun to be third person?
I was reading a book that mentioned the famous mathematician, George Pólya, who was born in Budapest.
He was among the first pioneers of combinatorics and was one of the first to make use of the word and the formula introduced by Carl Ludwig.
I wasn’t familiar with the word and I was surprised at how frequent its use was in the book. The book often talked about experts and the interesting problems they posed as part of their work.
To me, the author often started sentences with “there was”, “there was a problem with” and so on.
Is there a specific grammatical rule that I was not aware of that makes it so that “there” always requires a pronoun that can only be used with the third person?
If that is true, could someone make me aware of such rules so that I could use the word without worrying about being “flighty” and, of course, to improve my communication skills?
In the most common and traditional usage of English (the way British and American English speakers do it), the word “there” is used with certain noun phrases. This is called an “NP-raising” construction. It can’t be used with a definite noun: “There is George Pólya”; you need the plural “there are/are”. It can’t be used with the subject of the sentence, so you can’t say “The person is George Pólya” (this is what one would say, for example, of “he is Pólya”, which in those days was quite common). It can’t be used with an object, so “You are there to help” would be literally “
Can I use the Elasticsearch task API to run multiple tasks in parallel?
I am using the Elasticsearch task API to run commands against my Elasticsearch cluster. One task (using bash scripts) runs at a time. I’m wondering if there is a way for the task to run more than one at a time.
Task.execute(Command.INIT, “init”, singleInstance=”true”).getAndWait(); // init: executed one at a time
Task.execute(Command.PUT, “index”, “foo”, “bar”, singleInstance=”true”).getAndWait(); // put foo: executed one at a time
Task.execute(Command.GET, “index”, “foo”).getAndWait(); // get foo: executed one at a time
Can I somehow use the Task.execute() method to run multiple commands at the same time?
If not, what’s the recommended way to run multiple commands in parallel? (side note: I am using the Java API, but I would also be interested to know what’s the best way to do the same thing from the command line in case Java doesn’t provide a good way, I mean the shell.)
My suggestion would be to have a single task that simultaneously executes all the commands for you. Your current task requests the creation of a single Elasticsearch index and then waits for it to finish. If you instead wanted to use the task API to generate several indexes, just request them all at once:
Task.execute(Command.PUT, “index”, “foo”, “bar”, singleInstance=”true”)
.addOption(“h”, “help”, “command line help”)
.addOption(“T”, “timeout”, “set the task timeout in seconds”)
How to create a circle from a 2d image
I have created a piece of code that generates a 2d array of random numbers. These numbers are then plotted as a circle.
How can I extend the code so that the numbers are more randomly distributed and the resulting circle is filled?
I tried writing a while loop inside the for loop, but it didn’t work.
The code so far is as follows:
public static double genCircle(int Rows, int Cols, String window, double radius, String img
* OS: Windows 8.1 (or later)
* Processor: Intel Core i3 / AMD Athlon II X4 630 / ARM Cortex A9
* Memory: 2GB RAM (4GB recommended)
* Hard Disk: 8GB space
* Video: DirectX 9-compatible VGA card (1080p minimum)
* Sound: DirectX compatible sound card (stereo minimum)
* DirectX: DirectX 11
* Keyboard and Mouse